| Ich nutze: C-Control II Unit, CC2-ReglerBoard, OSOPT V3.0 |
>
> Just wanna put some of my experiences with the Keil C compiler (vers. 4.11)
> and the C-Control2 here to help others with the same setup.
>
> At the moment I use the C2 without the OS, and load the .hex (.H86) file
> with Andre's nice upload tool as one would do when replacing the OS.
>
> Mind you this may not be the definitive solution to this combination, but at least
> it works (well, at the moment).
>
> My programs hex file is about 3500 bytes long now and it has ca. 4k array variabes
> declarations, I have no idea if this setup will work with a bigger program, but...
>
>
>
> Memory setup in Options for Target:
>
> Target page:
> memory model: Small
> op. system: none
> use onchip rom / use onchip can: unchecked
> data near 6
> near memory: 16 / 16
>
> external memory:
> 1# rom 0x0 0xDFFF
> 2# ram 0xF600 0x200 (can't fit in the rom space at 0x40000 and make it work,
> I need to learn more about the linker methinks)
> 3# ram 0x80000 0xFFFF
> #4 ram 0xEF10 0xEF
>
> Output page:
> Create HEX file: checked
> HEX format: HEX-386(H167)
> (no offset when you replace the OS with a C program)
>
> everything else at default settings.
>
>
>
> if you have assembler code in a source file, remember to right click the
> file entry in the Source Group listing on the left
> and enable: Generate Assembler SRC File + Assemble SRC File.
>
> It has happened a few times on download that I've had a byte error
> message from the upload tool, but when analyzing the serial transfer log
> it has come from a couple of extra feedback FF bytes after the file was
> successfully transfered, and in my case the program worked fine none the less.
>
>
> If any of you have ideas or if you can se blatant faults I've made, I'd be
> most thankful for your input.
>
Hallo,
view here: http://www.cc2net.de/Foren/CC2Net_Forum/lesen.php?eintrag=636
hth krassos
Antwort schreiben
Antworten:
Re: Keil compiler (von mike DK - 4.07.2006 9:19)