Kommentar:
Einfügen von HTML im Kommentar:
Link einfügen: <a href="LINKURL" target="_blank">LINKTITEL</a>
Bild einfügen: <img src="BILDURL">
Text formatieren: <b>fetter Text</b>  <i>kursiver Text</i> <u>unterstrichener Text</u>
Kombinationen sind auch möglich z.B.: <b><i>fetter & kursiver Text</i></b>
C2 Quellcode formatieren: <code>Quellcode</code>
ASM Quellcode formatieren: <asm>Quellcode</asm>
(Innerhalb eines Quellcodeabschnitts ist kein html möglich.)
Wichtig: Bitte mache Zeilenumbrüche, bevor Du am rechten Rand des Eingabefeldes ankommst !  
> Hello Berhard, > replace speed wit one of the following constants: > 300 Baud = 0; > 600 Baud = 1; > 1200 Baud = 2; > 2400 Baud = 3; > 4800 Baud = 4; > 9600 Baud = 5; > 19200 Baud = 6; > 38400 Baud = 7; > 57600 Baud= 8; > 115200 Baud= 9; > > for example > > hwcom.setspeed(5); > > for 9600 Baud speed. > > because there is no variable named speed. > > i compiled the rest should be ok . > > mfg Tom > // > > > Hello Andre > > I tried to compile the programme for ASCII-codes and I got the following error messages. > > > > main (4): unknown identifier "speed" > > main (13): unknown identifier "line" > > > > Could you tell me what the problem is. I am using the original files of hwcom and lcdext. Could this be the problem. > > Regards, > > Bernard. > > > > > > > > > > > > > Hallo Bernard, > > > > > > What should be shown on the LC-Display ? > > > The Byte-Values or a string if there is sent the data > > > as an ASCII-string, by the PH-meter ? > > > > > > For Bytevalues you can use this: > > > > > > <code>thread main > > > {byte i; // charcounter > > > hwcom.init(); > > > hwcom.setspeed(speed); > > > lcdext.init(); > > > i=0; > > > loop > > > { > > > wait hwcom.rxd(); > > > lcdext.zahl3(hwcom.get()); > > > i=i+1; > > > if i>=32 i=0; // for 2x16 LCD, sets charcounter to 0 past 32 Chars > > > if (i%16)==0 lcdext.line((i/16)+1); //for 2x16 LCD, changes line past 16 Chars > > > } > > > }</code> > > > > > > For ASCII-codes you can use this: > > > > > > <code>thread main > > > {byte i; // charcounter > > > hwcom.init(); > > > hwcom.setspeed(speed); > > > lcdext.init(); > > > i=0; > > > loop > > > { > > > wait hwcom.rxd(); > > > lcdext.put(hwcom.get()); > > > i=i+4; > > > if i>=32 i=0; // for 2x16 LCD, sets charcounter to 0 past 32 Chars > > > if (i%16)==0 lcdext.line((i/16)+1); //for 2x16 LCD, changes line past 16 Chars > > > } > > > }</code> > > > > > > regards, André H. > > > > > > > > > > Hello, > > > > I have conrads c-controller station 2 and I have a question. > > > > Could someone please show me a programme that will read the input of the RS232 serial interface and output it > > > > onto the LCD screen. > > > > I have a pH meter connected to the serial interface and would like to read its output. > > > > Thank you, > > > > Bernard.

Dateianhang: (.gif, .png., .jpg, .zip, .rar)

max. 256kB

max. 256kB